Article number: 3090-VP-1X
Heat pump protection of the highest quality, made from pine and oiled with lineseed. We recommend that you paint the cover with wood primer and two layers of acrylate paint.
Easy to assemble
Our heat pump covers fit most makes and models and can be mounted either resting on a wall bracket or ground support, or bolted to the facade. The kit includes brackets. Mounting is done in 20-30 minutes using the included instructions.
This protection is tested by SP (Swedish National Testing and Research Institute). The test showed that the protection has no measurable impact (less than 5%) of the heat pump effect.
Painting the cover
For maximum performance and durability, the cover should be painted with one layer of wood primer and two layers of acrylate paint. The painting procedure should be done before mounting, shortly after it has been delivered to you. Avoid painting the cover in direct sunlight and always follow the paint manufacturer's advice.
Comes with reinforced wall brackets that provide good resistance to such slush.
Outer dimensions incl. roofing
Height: 700 mm
Width: 1000 mm
Depth: 550 mm
Height: 605 mm
Width: 940 mm
Depth: 410 mm
Our cover is suitable for air-air heat pumps from Panasonic, Mitsubishi, Toshiba, Fujitsu, Daikin, Coolix, Invest, Hitachi, IVT, Bosch etc.